3003 H18 Mill Finished Aluminum Disk Production Characterists:
Alloy: 1050/1060/1070/1100/3003
Thickness: 0.4-8.0mm
Diameter: 85-1250mm
End-use Application With 3003 H18 Mill Finish Aluminum Disk: Cookware, reflector, satellite
The properties of aluminum circles (or shaped blanks) make them ideal for use in a number of markets including the cookware, automotive and lighting industries:
Low anisotropy, which facilitates deep drawing
Strong mechanical properties
High and homogeneous heat diffusion
Ability to be enameled, covered by PTFE (or others), anodized
Good reflectivity
High strength-to-weight ratio
Durability and resistance to corrosion
Signi aluminum offers circles and shaped blanks in a wide range of alloys, tempers, thicknesses and diameters to meet all likely customer requirements.
3003 H18 Mill Finished Aluminum Disk Dimensions:
| Parameter | Range | Tolerance |
| Thickness for circles (mm) | 0.71 _ 6.35 | for 0.71 to 1.4 +/-0.08 |
| for 1.41 to 2.5 +0.1, -0.13 |
| for 2.51 to 4.0 +/-0.13 |
| for 4.01 to 5.00 +/-0.15 |
| for 5.01 to 6.35 +/-0.20 |
| Thickness for ovals (mm) | 1.75 _ 3.00 | for 1.75 to 2.5 +0.1, -0.13 |
| for 2.51 to 3.00 +/-0.13 |
| Diameter (mm) | 102 _ 1250 | (a) sheared circles +2, -0 |
| (b) punched circles +0.5, -0 |
| Earing | < 5% for ' O' temper
< 9% for H12, H14, H16, H18 | |
3003 H18 Mill Finished Aluminum Disk Mechanical Properties:
| Alloy (AA) | Temper | %E (min)
(at 50 mm gauge length) | UTS (mpa) | Bend test: radius of bend
(T=material thickness) |
| Min | Max |
| 1050 | O | 29 | 55 | 95 | close |
| H14 | 6 | 95 | 125 | 1/2T |
| H18 | 4 | 125 | - | 1T |
| 1070 | O | 29 | 95 | - | close |
| H14 | 6 | 95 | 120 | 1/2T |
| H18 | 4 | 120 | - | 1T |
| 3003 | O | 25 | 90 | 130 | close |
| H14 | 5 | 130 | 180 | 1/2T |
| H16 | 4 | 150 | 195 | 1T |
| H18 | 3 | 170 | - | 3T |
3003 H18 Mill Finished Aluminum Disk Chemical Composition"
| Alloy (%) | AA 1050 | AA 1070 | AA 1100 | AA 3003 |
| Fe | 0.40 | 0.25 | 1.00 | 0.70 |
| Si | 0.25 | 0.20 | (Fr + Si) | 0.60 |
| Mg | 0.05 | 0.03 | - | - |
| Mn | 0.05 | 0.03 | 0.05 | 1.00 _ 1.50 |
| Cu | 0.05 | 0.04 | 0.05 | 0.05 _ 0.20 |
| Zn | 0.05 | 0.04 | 0.10 | 0.10 |
| Ti | 0.03 | 0.03 | 0.05 | 0.10 (Ti + Zr) |
| Cr | - | - | - | - |
| Each (others) | 0.03 | 0.03 | 0.05 | 0.05 |
| Total (Others) | - | - | 0.125 | 0.15 |
| Al | 99.50 | 99.70 | 99.00 | Remaining |
FAQ
A1: How can I get a quotation from you ?
Q1:You can leave us message, and we will reply in time. Or we may talk on line by WhatsApp.
A2:Can I get samples before order ?
Q2:Yes, of course. Usually our samples are free.
A3:How do you make our business long-term and good relationship?
Q3: We keep good quality and competitive price to ensure our customers benefit ;We respect every customer as our friend and we sincerely do business and make friends with them,? no matter where they come from. Please feel free to leave us message if you have any question about us and our products.
Payment Term
- T/T- 30% T/T in advance, the balance 70% see copy of B/L (CFR, CIF term)
- T/T- 30% T/T in advance, the balance 70% before shipment (FOB term)
- L/C- 30% T/T in advance, the balance 70% via 100% irrevocable L/C at sight
